Editor AI Assistant in Antradus AI: How the WordPress Tools Actually Work

Editor AI assistant in Antradus AI gives you two distinct ways to rewrite content inside WordPress: quick text-level transforms for selected passages, and a whole-post instruction tool for full-article edits. The documentation at https://antradusai.com/docs/ai-assistant-and-text-tools/ makes the split clear, and that matters because each tool solves a different editing job.

You know the moment. A paragraph is almost right, but not quite. One sentence drags. Another sounds flat. Then the intro works, yet the rest of the post needs a broader rewrite. That gap between “close enough” and “ready to publish” is exactly where Antradus AI steps in.

Antradus AI is a WordPress AI plugin built to help you write, revise, and manage content without leaving the editor. On this documentation page, the focus is the in-editor assistant: tools that sit directly inside the writing interface, so you can edit while you work instead of copying text into a separate app.

What does the editor AI assistant actually do?

The editor AI assistant in Antradus AI lets you either transform selected text or instruct the AI to revise an entire post inside WordPress. As of version 2.0.3, updated July 25, 2026, the documentation shows two built-in tools with different scopes and access levels.

The first tool is the selection-based transformer, marked as “AI ✨”. You highlight text, open the relevant option in the editor, choose the type of change you want, and the selected text is replaced with the new result. If you do not like the output, Ctrl+Z restores the original wording. That simple undo detail matters because it turns experimentation into a low-risk edit, not a permanent one.

The second tool is the whole-post assistant. Instead of touching one paragraph or one sentence, you type a direct instruction for the entire article. The tool then rewrites the full body around that request. According to the source documentation, this feature appears at the bottom of the Antradus AI panel as a pill labelled “Tell Antradus AI what to do with this post.” In Lite, that same row appears locked as a Pro feature.

So, there are really two editing modes here: precision edits and structural edits. If you need to tighten one section, use the first. If you want to reshape the entire article, use the second.

How does the editor AI assistant work inside WordPress?

The editor AI assistant works directly inside the WordPress editor, with slightly different access points depending on whether you use the Classic editor or the Block editor. That built-in placement is the practical advantage of Antradus AI: you stay where you are already writing.

In the Classic editor, you select text and open the AI ✨ dropdown from the toolbar. In the Block editor, the option appears in the text toolbar for the block you are editing. The flow is short. Highlight text. Click the AI option. Pick a transform. Review the replacement. Undo if needed.

The documentation lists several specific transform actions. Rewrite changes wording while keeping the meaning. Enhance or Improve pushes for stronger phrasing and better flow. Expand adds more detail. Shorten trims without dropping the main point. Fix Grammar & Spelling limits the change to corrections, which is useful if you want accuracy without losing your voice.

There is also translation support. The source states that “Translate to…” works across 17 supported languages. That is a concrete capability, not a vague promise. For teams publishing multilingual content in WordPress, that can turn one draft into a localized version without moving through an external translation workflow.

And then there are the instruction-based options. “My instruction” runs a saved custom prompt in one click. “Custom instruction…” accepts a one-off prompt such as turning text into a bulleted list, adding a statistic, or changing tone. The point is flexibility. You are not locked into a handful of canned rewrite buttons.

Which editor AI assistant features are in Lite and which are Pro?

The editor AI assistant splits features between Antradus AI Lite and Antradus AI Pro, and the documentation is specific about where the line falls. The selection-based transform tool is available in Lite, while the full-post instruction tool is reserved for Pro.

That distinction matters because it affects how far you can push the workflow. With Lite, you still get meaningful editing power. You can rewrite, improve, expand, shorten, fix grammar and spelling, translate selected text, and run custom instructions on highlighted sections. For many writers, that covers the day-to-day work of polishing copy.

Pro adds the broader orchestration layer. Instead of working paragraph by paragraph, you can tell Antradus AI to reshape the whole article at once. The documentation gives useful example prompts: add a comparison table after the second heading, make the intro punchier and end with a question, or translate the whole post to Spanish. Those examples show that the whole-post assistant is not limited to style changes. It can alter structure, pacing, and output format across the body of the article.

If you edit in bursts and only need targeted help, Lite looks practical. If you routinely rebuild entire articles, Pro is the version that reaches that use case.

How do custom instructions and full-post edits differ?

Custom instructions and full-post edits differ mainly in scope: one acts on selected text, while the other rewrites the entire article body. The documentation for Antradus AI shows both, and understanding that difference helps you avoid clumsy results.

Custom instructions live inside the selection tool. You can type a one-off instruction for a highlighted passage, such as “make this a bulleted list” or “write like a pirate.” If you keep using the same prompt repeatedly, the plugin lets you save it once under Antradus AI → Editor AI Assistant → My Custom Instruction. After that, it appears as a one-click starred option in the menu.

That saved instruction feature is more useful than it sounds. Say your site always aims for an 8th-grade reading level, or your agency wants product blurbs rewritten in a fixed tone. Instead of retyping the prompt dozens of times, you save it once and apply it as a standard editing action. Faster. More consistent.

The whole-post assistant is broader and less surgical. You use it when the change should affect the article as a complete piece. The examples in the source document show exactly that: move structure, sharpen the introduction, or translate the full post. Those are not sentence-level tweaks. They are editorial commands.

“Both tools use your configured provider/model — quality follows the model you picked.”

The documentation says this plainly, and it is one of the most important lines on the page. Antradus AI gives you the workflow inside WordPress, but output quality still depends on the AI provider and model you have configured. Better models tend to produce cleaner rewrites, stronger reasoning, and more reliable formatting.

What are the limits and trade-offs of the editor AI assistant?

The editor AI assistant has real limits, and the most important ones involve post length, tool choice, and model quality. An honest read of the documentation shows that Antradus AI is efficient inside WordPress, but it is not magic.

The clearest hard limit is length. As of v2.0.3, the whole-post assistant handles posts up to roughly 2,000 words. If a post runs longer, the tool does not silently cut off the result. Instead, the documentation says it returns a clear message. That is good product behavior. You get a boundary, not a broken output that looks finished until you inspect it closely.

For longer pieces, the source recommends highlighting one section at a time and using the selection tools instead. Those transforms work on posts of any length because they only process the text you selected. So if you are editing a 3,500-word guide in WordPress, the practical move is to revise section by section rather than trying to push the entire draft through the whole-post assistant.

There is also a scope trade-off. Selection transforms are best for sentences, paragraphs, and short sections. The documentation says so directly. If you use a text-level tool on a huge chunk and expect a thoughtful article-wide restructure, you are using the wrong instrument.

Media handling is another area worth noting. The good news is specific: as of version 2.0.3, images, figures and captions, galleries, embeds, and shortcodes are preserved exactly through a whole-post edit unless your instruction explicitly asks to remove or replace them. That is a strong safeguard for WordPress publishers who rely on formatted posts, affiliate boxes, visual embeds, or shortcode-driven layouts.

But there is still judgment involved. If your instruction is vague, your result can be vague too. And if your configured model is weak, the output quality will reflect that.

What should you do with the editor AI assistant now?

You should match the Antradus AI tool to the job: use text transforms for focused rewrites, and use the whole-post assistant for article-wide direction inside WordPress. That is the most practical reading of the documentation at https://antradusai.com/docs/ai-assistant-and-text-tools/.

Start small. Highlight a paragraph and test Rewrite, Shorten, and Fix Grammar & Spelling on your own copy. Then save one custom instruction you know you will reuse. If your workflow often includes tone cleanup, simplification, or translation, that saved prompt will pay off quickly.

If you are using Pro, try the whole-post assistant on a draft under 2,000 words and give it a concrete instruction, not a fuzzy one. “Add a comparison table after the second heading” is better than “make it better.” Direct prompts produce cleaner editorial results.

Antradus AI matters because it keeps those edits inside WordPress, where publishing actually happens. No app switching. No pasted formatting mess. Just the editor, your draft, and the right level of AI help when you need it.